Download our General Tryout Instructions
|
Ford Tryout Keys
Ford Pin Tumbler Locks
1967 + Ignition Locks
Set# TO-1.................................................................................................................................................................$114.95
Key Blank: H51 Code Series: FA0-FA1863 Spaces Cut: 1-5 # of keys: 70
Description: Works on all Ignition locks from 1967 to about 1984. Some up until the early 1990's
Special Instructions: This set is loose in a box, simply try one key at a time in the Ignition. Please note that each key is cut different on each side, so try one side if it does not work flip it over and try the other side. Keep going until you find a key that works.
1967 + Door Locks
Set# TO-2.................................................................................................................................................................$114.95
Key Blank: H50 Code Series: FB0-FB1863 Spaces Cut: 1-5 # of keys: 70
Description: Works on all door locks from 1967 to about 1984. Some up until the early 1990's
Special Instructions: This set is loose in a box, simply try one key at a time in the Ignition. Please note that each key is cut different on each side, so try one side if it does not work flip it over and try the other side. Keep going until you find a key that works.
1954 -1966 Door & Ignition Locks
Set# TO-118..............................................................................................................................................................$181.50
Key Blank: H27 Code Series: FE/FL000-999 Spaces Cut: 1-5 # of keys: 92
Description: Works on all door and ignition locks using the H26 / H27 Key
Special Instructions: This set is loose in a box, simply try one key at a time in the Ignition or door until you find a key that works.
Set# TO-1.................................................................................................................................................................$114.95
Key Blank: H51 Code Series: FA0-FA1863 Spaces Cut: 1-5 # of keys: 70
Description: Works on all Ignition locks from 1967 to about 1984. Some up until the early 1990's
Special Instructions: This set is loose in a box, simply try one key at a time in the Ignition. Please note that each key is cut different on each side, so try one side if it does not work flip it over and try the other side. Keep going until you find a key that works.
1967 + Door Locks
Set# TO-2.................................................................................................................................................................$114.95
Key Blank: H50 Code Series: FB0-FB1863 Spaces Cut: 1-5 # of keys: 70
Description: Works on all door locks from 1967 to about 1984. Some up until the early 1990's
Special Instructions: This set is loose in a box, simply try one key at a time in the Ignition. Please note that each key is cut different on each side, so try one side if it does not work flip it over and try the other side. Keep going until you find a key that works.
1954 -1966 Door & Ignition Locks
Set# TO-118..............................................................................................................................................................$181.50
Key Blank: H27 Code Series: FE/FL000-999 Spaces Cut: 1-5 # of keys: 92
Description: Works on all door and ignition locks using the H26 / H27 Key
Special Instructions: This set is loose in a box, simply try one key at a time in the Ignition or door until you find a key that works.
Ford 10 Cut Wafer Locks "The System"
1984 1/2 and UP Ignition Locks
Set# TO-3.................................................................................................................................................................$169.40
Key Blank: H60 Code Series: A-B-C-D-E Spaces Cut: 5-10 # of keys: 102
Description: Works on all ford 10 cut ignitions from 1984 1/2+.
Special Instructions: This set is grouped in 7 boxes labeled A-G. Start anywhere in the set and try each key on both sides until one works. We provide a list of the actual cuts for each key to made a "code" key if you wish. Please note that this set can be used with the TO-40 Door set.
example using the TO-40 set with the TO-3:If you found a ingition key that turned in box b, go to box b in the TO-40 ignition set and 1 of the keys will work the door. In other words we have grouped the TO-3 and TO-40 sets togeather so when you find a key that works in one of the boxes use the same box in the other set to get the rest of the key. This will save you a TON of time!
1984 1/2 and UP Door Locks
Set# TO-40...............................................................................................................................................................$169.40
Key Blank: H60 Code Series: A-B-C-D-E Spaces Cut: 1-6 # of keys: 109
Description: Works on all ford 10 cut door locks from 1984 1/2+.
Special Instructions: This set is grouped in 7 boxes labeled A-G. Start anywhere in the set and try each key on both sides until one works. We provide a list of the actual cuts for each key to made a "code" key if you wish. Please note that this set can be used with the TO-3 Door set. Please see the exaple in the TO-3 description.
1991 and UP Door Locks (Escort, and Tracer)
Set# TO-56...............................................................................................................................................................$169.40
Key Blank: H60 Code Series: A-B-C-D-E Spaces Cut: 4-9 # of keys: 109
Description: Works on all Escort and Tracer 10 cut ignitions from 1991 +
Special Instructions: This set is grouped in 7 boxes labeled AA-GG. Start anywhere in the set and try each key on both sides until one works. We provide a list of the actual cuts for each key to made a "code" key if you wish.
Ford 8 Cut Wafer Locks
All Door Locks (Spaces 1-6)
Set# TO-82...............................................................................................................................................................$211.75
Key Blank: H75 Code Series: 0001X-1706X Spaces Cut: 1-6 # of keys: 134
Description: Works on all Ford 8 cut door locks spaces 1-6 (about 95% of ford door locks)
Special Instructions: This set is grouped in 3 boxes ( A,B,C ). If you read the 1st wafer in the door (we give you instructions how) you will never have to try more than 69 keys to get a working door key. We give you the code cuts for the key so you can make a "code" key if you would like. After you have your working door key you are missing cuts 7 and 8. We give you a easy progression chart to follow to get the last 2 missing cuts!
All Door Locks (Spaces 2-7)
Set# TO-110..............................................................................................................................................................$302.50
Key Blank: H75 Code Series: 0001X-1706X Spaces Cut: 2-7 # of keys: 213
Description: Works on all Ford 8 cut door locks spaces 2-7
Special Instructions: This set is grouped in 3 boxes ( A,B,C ). If you read the 1st wafer in the door (we give you instructions how) you will never have to try more than 75 keys to get a working door key. We give you the code cuts for the key so you can make a "code" key if you would like. After you have your working door key you are missing cuts 1 and 8. Almost all ignitions are spaces 2-8 so you will only need to progress the 8 cut to get a working ignition key!
Ignition Locks (Spaces 2-8)
Set# TO-111..............................................................................................................................................................$605.00
Key Blank: H75 Code Series: 0001X-1706X Spaces Cut: 2-8 # of keys: 416
Description: Works on ford 8 cut ignitions using spaces 2-8 (about 98% of all ford ignitions)
Special Instructions: This set is grouped in 3 boxes ( A,B,C ). If you read the 1st wafer in the door (we give you instructions how) you will never have to try more than 175 keys to get a working door key. We give you the code cuts for the key so you can make a "code" key if you would like. After you have your working ignition key you are missing cut 1! Simply progress cut 1 (most of the time for the door) and you are done!
All Locks
Set# TO-92...............................................................................................................................................................$665.50
Key Blank: H75 Code Series: 0001X-1706X Spaces Cut: 1-8 # of keys: 450
Description: Works on all Ford 8 cut locks with codes series 0001X-1706X
Special Instructions: This set is grouped in 4 boxes ( A,B,C,D ) see below
If door lock spaces are 1-6: If you read the 1st wafer in the door if (we give you instructions how) you will never have to try more than 150 keys to get a working Ignition key. We give you the code cuts for the key so you can make a "code" key if you would like.
All other configurations: You can try to read the 1st wafer in the Ignition to cut down the amount of keys you will have to try. We recommend if possible to start in the door lock then move to the ignition. You can start at the ignition, if you do please be sure to wiggle the key in ignition not the ignition ears!!
Deck & Tailgate Locks
Set# TO-84...............................................................................................................................................................$272.25
Key Blank: H75 Code Series: 0001X-1706X Spaces Cut: 3-8 # of keys: 202
Description: Works on deck and tailgate locks using spaces 3-8
Special Instructions:This set is grouped in 3 boxes ( A,B,C ). If you read the 1st wafer in the tailgate or deck (we give you instructions how) you will never have to try more than 87 keys to get a working door key.
Glove Box Locks (stowage on Taurus,Sable, & Lincoln Mark VIII)
Set# TO-85.................................................................................................................................................................$36.30
Key Blank: H75 Code Series: 0001X-1706X Spaces Cut: 6-8 # of keys: 16
Description: Works on glove box locks mfg'd by Briggs & Stratton
Special Instructions: Try each key in the glove box lock. Once you find a working key you are missing cuts 1-5
Glove Box Locks (stowage on Taurus,Sable, & Lincoln Mark VIII)
Set# TO-85A...............................................................................................................................................................$36.30
Key Blank: H75 Code Series: 0001X-1706X Spaces Cut: 5-7 # of keys: 17
Description: Works on glove box locks mfg'd by Huff
Special Instructions: Try each key in the glove box lock. Once you find a working key you are missing cuts 1-4 and 8
Glove Box Locks (stowage on Taurus,Sable, & Lincoln Mark VIII)
Set# TO-86................................................................................................................................................................$60.50
Key Blank: H75 Code Series: 0001X-1706X Spaces Cut: 5-8 # of keys: 38
Description: Works on all glove box locks with spaces between 5-8
Special Instructions: Try each key in the glove box lock. Once you find a working key you are missing cuts 1-4
Set# TO-82...............................................................................................................................................................$211.75
Key Blank: H75 Code Series: 0001X-1706X Spaces Cut: 1-6 # of keys: 134
Description: Works on all Ford 8 cut door locks spaces 1-6 (about 95% of ford door locks)
Special Instructions: This set is grouped in 3 boxes ( A,B,C ). If you read the 1st wafer in the door (we give you instructions how) you will never have to try more than 69 keys to get a working door key. We give you the code cuts for the key so you can make a "code" key if you would like. After you have your working door key you are missing cuts 7 and 8. We give you a easy progression chart to follow to get the last 2 missing cuts!
All Door Locks (Spaces 2-7)
Set# TO-110..............................................................................................................................................................$302.50
Key Blank: H75 Code Series: 0001X-1706X Spaces Cut: 2-7 # of keys: 213
Description: Works on all Ford 8 cut door locks spaces 2-7
Special Instructions: This set is grouped in 3 boxes ( A,B,C ). If you read the 1st wafer in the door (we give you instructions how) you will never have to try more than 75 keys to get a working door key. We give you the code cuts for the key so you can make a "code" key if you would like. After you have your working door key you are missing cuts 1 and 8. Almost all ignitions are spaces 2-8 so you will only need to progress the 8 cut to get a working ignition key!
Ignition Locks (Spaces 2-8)
Set# TO-111..............................................................................................................................................................$605.00
Key Blank: H75 Code Series: 0001X-1706X Spaces Cut: 2-8 # of keys: 416
Description: Works on ford 8 cut ignitions using spaces 2-8 (about 98% of all ford ignitions)
Special Instructions: This set is grouped in 3 boxes ( A,B,C ). If you read the 1st wafer in the door (we give you instructions how) you will never have to try more than 175 keys to get a working door key. We give you the code cuts for the key so you can make a "code" key if you would like. After you have your working ignition key you are missing cut 1! Simply progress cut 1 (most of the time for the door) and you are done!
All Locks
Set# TO-92...............................................................................................................................................................$665.50
Key Blank: H75 Code Series: 0001X-1706X Spaces Cut: 1-8 # of keys: 450
Description: Works on all Ford 8 cut locks with codes series 0001X-1706X
Special Instructions: This set is grouped in 4 boxes ( A,B,C,D ) see below
If door lock spaces are 1-6: If you read the 1st wafer in the door if (we give you instructions how) you will never have to try more than 150 keys to get a working Ignition key. We give you the code cuts for the key so you can make a "code" key if you would like.
All other configurations: You can try to read the 1st wafer in the Ignition to cut down the amount of keys you will have to try. We recommend if possible to start in the door lock then move to the ignition. You can start at the ignition, if you do please be sure to wiggle the key in ignition not the ignition ears!!
Deck & Tailgate Locks
Set# TO-84...............................................................................................................................................................$272.25
Key Blank: H75 Code Series: 0001X-1706X Spaces Cut: 3-8 # of keys: 202
Description: Works on deck and tailgate locks using spaces 3-8
Special Instructions:This set is grouped in 3 boxes ( A,B,C ). If you read the 1st wafer in the tailgate or deck (we give you instructions how) you will never have to try more than 87 keys to get a working door key.
Glove Box Locks (stowage on Taurus,Sable, & Lincoln Mark VIII)
Set# TO-85.................................................................................................................................................................$36.30
Key Blank: H75 Code Series: 0001X-1706X Spaces Cut: 6-8 # of keys: 16
Description: Works on glove box locks mfg'd by Briggs & Stratton
Special Instructions: Try each key in the glove box lock. Once you find a working key you are missing cuts 1-5
Glove Box Locks (stowage on Taurus,Sable, & Lincoln Mark VIII)
Set# TO-85A...............................................................................................................................................................$36.30
Key Blank: H75 Code Series: 0001X-1706X Spaces Cut: 5-7 # of keys: 17
Description: Works on glove box locks mfg'd by Huff
Special Instructions: Try each key in the glove box lock. Once you find a working key you are missing cuts 1-4 and 8
Glove Box Locks (stowage on Taurus,Sable, & Lincoln Mark VIII)
Set# TO-86................................................................................................................................................................$60.50
Key Blank: H75 Code Series: 0001X-1706X Spaces Cut: 5-8 # of keys: 38
Description: Works on all glove box locks with spaces between 5-8
Special Instructions: Try each key in the glove box lock. Once you find a working key you are missing cuts 1-4